I Got Tired of Coming into my Lab to Check the Pressure of my Cryocooler so I Built a Tool to do it for Me
This is a submission for the Hacktoberfest Open-Source AI Challenge Week 3: Slow and Steady ...
First seen by Oriel on .
AI summary
A Raspberry Pi-based monitoring system streams cryocooler sensor readings to TigerData Cloud and serves live gauges and historical graphs, letting lab staff check pressure remotely.
- A custom PCB and ADS1115 read two voltage channels, while an OLED displays live values and supports configurable conversion formulas and settings.
- The Pi buffers readings during network outages and writes timestamped raw voltage to a TimescaleDB hypertable; conversion formulas are applied downstream.
- Graphs use time_bucket() to reduce results to about 300 points, while a one-minute continuous aggregate supports views of six hours or longer.
- Data is compressed after one day and retained for 90 days; a read-only dashboard role and simulated-data demo mode support safer sharing.
- The project uses Python, Flask, FastAPI, Tailwind CSS, Chart.js, and GitHub Copilot, with code available on GitHub and the PCB available by request.
#raspberry pi #timescaledb #sensor monitoring #copilot
Generated by gpt-5.6-sol. Check the original for details.
Metric trends
Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained
Reactions
Total public reactions reported by the source; distinct from points and likes.
- DEV Community: 64, latest observation ; +44 over observed period since
Comments
Comment count reported by the source.
- DEV Community: 26, latest observation ; +24 over observed period since
Aliases
| Source | External ID | URL |
|---|---|---|
| DEV Community | 4890855 | https://dev.to/pahorton/i-got-tired-of-coming-into-my-lab-to-check-the-pressure-of-my-cryocooler-so-i-built-a-tool-to-do-it-4ob7 Read discussion |