Code-execution flaw in UEFI firmware affects most servers on planet Earth
First seen by Oriel on .
AI summary
Ars Technica reports that CVE-2026-97631, a critical EDK2 ICMP buffer overflow, enables firmware-level code execution during PXE boot before Secure Boot and TPM protections activate.
- The flaw is a 16-year-old buffer overflow in NetworkPkg/UefiPxeBcDxe, EDK2’s PXE-Base Code driver for network booting.
- Oversized IPv4 or IPv6 ICMP error messages overwrite a fixed 504-byte buffer, corrupting UEFI state and potentially executing attacker-controlled code in ring 0.
- Exploitation requires low-level access to the local network, PXE boot activity, and target-specific knowledge of firmware addresses; it is not a universal exploit.
- The vulnerability affects organizations using EDK2-based firmware with PXE enabled, while disk-only home and small-office systems are excluded.
- Firmware makers must provide BIOS/UEFI updates; organizations should investigate affected systems, consider disabling network boot, and monitor logs for exploitation attempts.
#uefi #edk2 #pxe boot #firmware security
Generated by gpt-5.6-sol. Check the original for details.
Metric trends
Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained
Points
Score reported by the source.
- Hacker News: 305, latest observation ; +295 over observed period since
- Lobsters: 34, latest observation ; +31 over observed period since
Comments
Comment count reported by the source.
- Hacker News: 228, latest observation ; +225 over observed period since
- Lobsters: 19, latest observation ; +19 over observed period since