Oriel — AI & technology worth noticing, every day.

Marelleo, a story box I built for my kids

Web page · https://zebra.rodeo/en/blog/marelleo

First seen by Oriel on .

AI summary

This build log describes Marelleo, a screen-free, customizable NFC story box, and the iterative electronics, enclosure, PCB, safety, and debugging work required to make it durable for children.

  • An ESP32, NFC reader, audio hardware, battery, and SD card play a track when a tagged figurine or other object is placed on the box.
  • Breadboarding enabled rapid experimentation, but soldered perfboard and a child-tested 3D-printed enclosure were needed after loose contacts, torn wires, and destructive knob handling.
  • The final PCB consolidated power, charging, amplification, SD, and connectors; 491 copper tracks were routed manually in KiCad, while Claude reviewed schematics.
  • Review caught a potentially fatal 13.7 V regulator error, a reversed diode, and disabled clearance checking before manufacturing.
  • JLCPCB supplied five assembled boards for 160 euros; initial testing failed because NFC serial wires were swapped and the device was not truly restarting.

#esp32 #nfc #pcb design #3d printing

Generated by gpt-5.6-sol. Check the original for details.

Metric trends

Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained

Points

Score reported by the source.

  • Hacker News: 193, latest observation ; +182 over observed period since
  • Lobsters: 4, latest observation ; +3 over observed period since

Comments

Comment count reported by the source.

  • Hacker News: 51, latest observation ; +47 over observed period since
  • Lobsters: 7, latest observation ; +7 over observed period since

Aliases

SourceExternal IDURL
Hacker News50260753https://zebra.rodeo/en/blog/marelleo/ Read discussion
Lobstershgx46ohttps://zebra.rodeo/en/blog/marelleo/ Read discussion