Oriel — AI & technology worth noticing, every day.

Reverse engineering a vintage diode-transistor logic chip

Web page · https://righto.com/2026/11/signetics-st680a-dtl-nand.html

First seen by Oriel on .

AI summary

This article reverse-engineers Signetics’ 1965 ST680A, revealing a quad diode-transistor logic NAND chip and explaining its die layout, circuit operation, and shared silicon design.

  • The ST680A uses bipolar NPN transistors, input diodes, and 16 serpentine silicon resistors fabricated on an unpassivated die.
  • Each output transistor can sink 2.5 mA, while a resistor pulls the output high and consumes power when the output is low.
  • DTL input diodes prevent inputs from affecting one another, and an intermediate diode improves noise tolerance by raising the switching threshold.
  • The same silicon layout supported the 670A triple three-input NAND and 616A dual five-input NAND through different metal layers.
  • The 616A also provided expansion inputs, allowing external diodes to extend each NAND gate with additional inputs.

#dtl #signetics #semiconductor history #reverse engineering

Generated by gpt-5.6-sol. Check the original for details.

Metric trends

Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained

Points

Score reported by the source.

  • Hacker News: 118, latest observation ; +111 over observed period since
  • Lobsters: 7, latest observation ; +6 over observed period since

Comments

Comment count reported by the source.

  • Hacker News: 9, latest observation ; +8 over observed period since
  • Lobsters: 0, latest observation ; 0 over observed period since

Aliases

SourceExternal IDURL
Hacker News50416011https://www.righto.com/2026/11/signetics-st680a-dtl-nand.html Read discussion
Lobstersjqvofwhttp://www.righto.com/2026/11/signetics-st680a-dtl-nand.html Read discussion