Hands on with Home Assistant's new 'smart home multi-tool'
Web page · https://theverge.com/tech/1031601/home-assistant-connect-aux-2-hands-on
First seen by Oriel on .
AI summary
The $69 Home Assistant Connect Aux-2 packages Bluetooth proxying, audio streaming, serial control, and peripheral connectivity into an ESPHome-based box that makes integrating non-smart devices easier than typical DIY alternatives.
- It offers 2.4GHz Wi-Fi, Bluetooth, Ethernet with PoE, USB-A, USB-C, audio, Grove, and two RS-232 ports for sensors, radios, speakers, and serial-controlled equipment.
- Browser-based firmware installation, Wi-Fi provisioning, ESPHome discovery, and Home Assistant's guided setup made initial configuration straightforward.
- In testing, its Bluetooth proxy automatically found Govee hygrometers and maintained connections through three walls and a refrigerator, restoring fridge temperature monitoring.
- Music Assistant setup took under 30 minutes and enabled in-wall speakers, but Sendspin grouping, AirPlay, and Spotify Connect were not yet working.
- Comparable functions can be built more cheaply with ESP32 hardware or the $35 Apollo Automations Cast-1; serial control remained untested.
#home assistant #esphome #smart home #whole-home audio
Generated by gpt-5.6-sol. Check the original for details.
Metric trends
Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained
Points
Score reported by the source.
- Hacker News: 4, latest observation ; 0 over observed period since
Comments
Comment count reported by the source.
- Hacker News: 1, latest observation ; +1 over observed period since
Aliases
| Source | External ID | URL |
|---|---|---|
| Hacker News | 50460619 | https://www.theverge.com/tech/1031601/home-assistant-connect-aux-2-hands-on Read discussion |