Hands-on fabrication of 2D material field-effect transistors for the classroom
Web page · https://iopscience.iop.org/article/10.1088/1361-6404/aeb51a
First seen by Oriel on .
AI summary
The page presents a classroom-ready method for fabricating and characterizing MoS2 ionic-gel-gated FETs using commercial hydrogel electrodes, pre-patterned IDEs, adhesive tape, and minimal equipment.
- Commercial TENS hydrogel provides an areal capacitance of approximately 9 × 10−3 F m−2, with weak frequency dependence between 1 and 100 Hz.
- Students mechanically exfoliate MoS2 onto Nitto SPV 224 tape, thermally transfer flakes onto Micrux interdigitated electrodes, and add hydrogel with a copper or aluminum gate.
- Pre-patterned gold electrodes have 10 µm fingers and gaps, typically cost below 10 € per device, and eliminate lithography and metal deposition.
- The devices operate at gate voltages from −1 V to +1 V and produce microampere-scale currents measurable with relatively inexpensive equipment and alligator clips.
- Transfer characteristics show pronounced hysteresis attributed to slow ion migration and electric-double-layer formation at the electrolyte–semiconductor interface.
#mos2 #field-effect transistors #ionic gels #electronics education
Generated by gpt-5.6-sol. Check the original for details.
Metric trends
Last 30 days · Up to 120 recorded samples per source and metric, with reposts kept separate · First and latest retained
Points
Score reported by the source.
- Hacker News: 11, latest observation ; +8 over observed period since
Comments
Comment count reported by the source.
- Hacker News: 0, latest observation ; 0 over observed period since
Aliases
| Source | External ID | URL |
|---|---|---|
| Hacker News | 50470880 | https://iopscience.iop.org/article/10.1088/1361-6404/aeb51a Read discussion |